Proven clones for the home grower community

By Chris Gaffney

What Size Inline Fan and Carbon Filter for Your Grow Tent?

Size the inline fan for your grow tent first, then match the carbon filter for grow tents and ducting to the fan's diameter. On our size pages, the 2x2 and 2x4 setups use a 4-inch fan and filter, the 3x3 and 4x4 use 6-inch, and the 5x5 uses 8-inch. Running the fan through a speed controller lets you adjust airflow as conditions change.

ㅤ

📊 Quick Sizing Table

Tent Inline fan Carbon filter Ducting and clamps
2x2 4-inch 4-inch 4-inch
2x4 4-inch 4-inch 4-inch
3x3 6-inch 6-inch 6-inch
4x4 6-inch 6-inch 6-inch
5x5 8-inch 8-inch 8-inch

These are the matched builds on our size pages. AC Infinity's all-in-one kits may use a different fan size; for example, its 2x4 kit uses a 6-inch EC inline fan.

ㅤ

🔗 Why the Filter and Ducting Should Match the Fan

When the fan, filter and ducting share one diameter, they connect directly and can be sealed with matching clamps. Mixing sizes usually means adapters, which can add joints where air may leak.

ㅤ

🌡️ What Can Change the Size You Need

Heat from the light

Stronger lights tend to add more heat, which is one reason larger tents in our setups step up to larger fans.

Duct length and bends

Long runs and tight bends can reduce airflow. On our size pages we suggest 8 ft of ducting for most tents and 25 ft only when the vent is across the room.

The carbon filter

Air has to pass through the filter's carbon bed, so the filter adds some resistance. Pairing a filter with a fan of the same diameter is the simplest way to keep them matched.

ㅤ

🌀 Exhaust, Intake and Circulation Fans

An inline fan moves air out of the tent (exhaust). Fresh air enters through the tent's intake openings. A clip fan stirs air inside the tent. AC Infinity's CLOUDRAY clip fans come in 4-inch and 6-inch sizes with 10 speeds. You can compare them on our circulation fans page.

ㅤ

🎛️ Speed Control and Noise

A fan running at full speed all the time is often louder than it needs to be. The inline fans in our setups include a speed controller, and a climate controller such as the CONTROLLER 69 PRO can adjust fan speed based on temperature and humidity readings. See our controllers page for options.

ㅤ

🪟 Ducting and Venting Out of the Room

Four-layer aluminum ducting and stainless steel clamps connect the fan and filter. An adjustable window duct kit can send exhaust air outside. Everything is listed by size on our ducting and venting page.

ㅤ

🧪 Carbon Filter Basics

A duct carbon filter helps keep grow smells inside the tent by passing air through activated carbon. AC Infinity's duct carbon filters use Australian charcoal and come in 4, 6 and 8-inch sizes. For placement and replacement guidance, follow AC Infinity's manual for your filter.

ㅤ

❓ Frequently Asked Questions

What size inline fan do I need for a 4x4 grow tent?

Our 4x4 setup uses a 6-inch inline fan with a 6-inch carbon filter and ducting. The CLOUDLAB 844 in that setup has 4-inch and 8-inch duct ports, so the 6-inch duct can connect to an 8-inch port with an 8-to-6-inch duct reducer.

Should the carbon filter be the same size as the inline fan?

In our setups, yes. Matching diameters lets the filter, fan and ducting connect directly.

Do I need a carbon filter in a grow tent?

A carbon filter is optional, but many home growers use one to help keep grow smells inside the tent.

Can an inline fan be too big for a grow tent?

A larger fan can still work if you can turn its speed down. A speed controller helps match airflow to the tent.

Do I still need a clip fan if I have an inline fan?

Usually, yes. The inline fan exchanges air with the room, while a clip fan keeps air moving around the plants inside.

ㅤ

📚 Continue Learning

ㅤ

🌿 Ready to Fill Your Tent?

With airflow sorted, your tent is ready for plants. Browse our rooted cannabis clones, then see our inline fans to match the gear to your space.