4x4 Grow Setup
Room for four plants. Here's everything that fits a 4x4 tent, matched so it all works together perfectly.
One and Done: Complete Grow Kits
A one-and-done purchase: tent, light, airflow and controls in a single box.

Advance Grow Tent Kit 4x4, 4-Plant
Includes EC inline fan 6", oscillating clip fan 6", and 4x4 full-spectrum grow light with Samsung LM301H LEDs. AI-driven controller predicts climate shifts using real-time and historical data, auto-adjusting connected devices for optimal grow conditions.
Coverage: 4 x 4 ft | Plants: 4 | Smart control: WiFi app
Build It Yourself
Pick each piece, step by step.
Step 1: The Tent

CLOUDLAB 844 Grow Tent 4x4
A 48 x 48 x 80 in home-grow favorite with room for four plants.
Size: 48 x 48 x 80 in | 2000D mylar canvas | Fits: 4 plants
Step 2: The Light
Sized to cover a 4x4 tent.

IONFRAME EVO6 LED Grow Light, 4x4
A bar-style full-spectrum LED that evenly lights a 4 x 4 ft tent.
Power: 500W | Coverage: 4 x 4 ft | Diodes: Samsung LM301H EVO
Pairs with the CLOUDLAB 844 tent.
Step 3: Fresh Air
A 6-inch fan pulls air through a 6-inch filter and out through 6-inch ducting. Everything here is the same 6-inch size, so it all connects. The CLOUDLAB 844's duct ports are 4-inch and 8-inch, so the 6-inch duct can exit through an 8-inch port with an 8-to-6-inch duct reducer.

CLOUDLINE PRO S6 Inline Fan 6-Inch
A quiet 6-inch inline fan with a speed controller, a popular choice for 3x3 and 4x4 tents.
Size: 6 in | Speed controller included

Duct Carbon Filter 6-Inch
A 6-inch carbon filter for 3x3 and 4x4 tents that keeps odors in check.
Size: 6 in | Australian charcoal
Fits the 6-inch fan.

Flexible Four-Layer Ducting 6-Inch, 8 Ft
8 feet of flexible 6-inch ducting for linking a fan and filter.
Diameter: 6 in | Length: 8 ft
8 ft is enough to run from the filter to the fan and out of most tents. Pick 25 ft only if your vent is across the room.

Flexible Four-Layer Ducting 6-Inch, 25 Ft
25 feet of 6-inch ducting for longer vent runs.
Diameter: 6 in | Length: 25 ft

Stainless Steel Duct Clamps 6-Inch, 2-Pack
Two stainless clamps for 6-inch ducting connections.
Size: 6 in | Qty: 2
Seals each 6-inch connection. One 2-pack covers both ends of the fan.

Window Duct Kit for Inline Fans
An adjustable window vent port that sends your tent air outside.
Adjustable window port
Optional: vents the air out a window.
Step 4: Airflow
A gentle breeze inside the tent for strong stems.

CLOUDRAY S6 Gen 2 Clip Fan 6-Inch, 2-Pack
Two quiet 6-inch clip fans with EC motors, 10 speeds, 10 oscillation levels and natural wind modes.
Size: 6 in | Qty: 2 | EC motor | 10 speeds
Step 5: Humidity
A humidifier for young plants and a dehumidifier for flowering, both sized for this tent.

CLOUDFORGE T7 Plant Humidifier 15L
A large 15 L humidifier for bigger tents and longer stretches between refills.
Tank: 15 L | Smart controls | Targeted vaporizing
For clones and young plants.

HYDRONE 5 Plant Dehumidifier
A compact dehumidifier with 10 levels of control that pulls extra moisture out of your tent.
10-level controls
For flowering, when plants give off more moisture.
Step 6: Controller
One controller runs the fan and the humidifier together.

CONTROLLER 69 PRO
Runs up to four devices on their own programs, including VPD, temperature, humidity, schedules and cycles.
Devices: 4 | Bluetooth + WiFi | VPD, temp, humidity, schedules
Plugs into the 6-inch fan and the humidifier.

CONTROLLER 69 PRO+
Everything in the 69 PRO, expanded to eight devices.
Devices: 8 | Bluetooth + WiFi | VPD, temp, humidity, schedules

CONTROLLER AI+ Environmental Controller
A smart controller that learns your setup and adjusts devices for you, with dual-zone VPD, temperature and humidity.
Dual-zone VPD | Bluetooth + WiFi | AI-assisted adjustments
Add-ons
Pots and watering
A 4x4 tent holds 4 plants.

Self-Watering Fabric Pot Base XL, 4-Pack
An XL size of the self-watering base for bigger fabric pots.
Size: XL | Qty: 4
You need 4 pots: get 1 pack (4 pots).
Clone gear
Root your next round while this one grows. See all Clone & Propagation →

Humidity Dome Germination Kit with Heat Mat and LED Bars, 5x8 Cell
Dome, 40-cell tray, seedling heat mat and LED bars in one box.
Tray: 5 x 8 (40 cells) | Includes heat mat and LED bars

Humidity Dome Propagation Kit with Height Extension, 5x8 Cell
A simple dome and 40-cell tray with an extension that gives taller cuttings extra headroom.
Tray: 5 x 8 (40 cells) | Includes height extension

Clone Collars 2-Inch, 100-Pack
Soft 2-inch foam discs that hold cuttings upright in cloners and net pots.
Size: 2 in | 8-spoke design | Qty: 100
Your complete 4x4 setup
One and Done kit: $999
You save $419.96 with the One and Done kit.
Tent, light, airflow and controls in one box.
Build it yourself: $1,418.96
See the build-it-yourself picks
- CLOUDLAB 844 Grow Tent 4x4$199.00
- IONFRAME EVO6 LED Grow Light, 4x4$579.00
- CLOUDLINE PRO S6 Inline Fan 6-Inch$99.00
- Duct Carbon Filter 6-Inch$69.99
- Flexible Four-Layer Ducting 6-Inch, 8 Ft$16.99
- Stainless Steel Duct Clamps 6-Inch, 2-Pack$7.99
- CLOUDRAY S6 Gen 2 Clip Fan 6-Inch, 2-Pack$99.00
- CLOUDFORGE T7 Plant Humidifier 15L$169.00
- CONTROLLER 69 PRO$79.99
- Self-Watering Fabric Pot Base XL, 4-Pack$99.00
- We ship clones Monday through Wednesday via UPS Next Day Air or UPS 2nd Day Air.
- Every AC Infinity product ships from AC Infinity and comes with an AC Infinity manufacturer warranty.
- Questions? We grow at home too. Just ask: support@clonetohome.com