2x2 Grow Setup
Room for one plant. Here's everything that fits a 2x2 tent, matched so it all works together perfectly.
One and Done: Complete Grow Kits
A one-and-done purchase: tent, light, airflow and controls in a single box.

Advance Grow Tent Kit 2x2, 1-Plant
A complete 1-plant setup built around a 24 x 24 x 72 in tent, with a full-spectrum LED, inline ventilation, a clip fan and a WiFi controller that runs it all.
Tent: 24 x 24 x 72 in | Coverage: 2 x 2 ft | Plants: 1 | Smart control: WiFi app

Advance Grow Tent Kit Compact 2x2, 1-Plant
The same 1-plant kit idea in a shorter 24 x 24 x 48 in tent, made for closets, shelves and rooms with low ceilings.
Tent: 24 x 24 x 48 in | Coverage: 2 x 2 ft | Plants: 1 | Smart control: WiFi app
Build It Yourself
Pick each piece, step by step.
Step 1: The Tent

CLOUDLAB 722 Grow Tent 2x2x6
A 2 x 2 ft footprint with a full 72 in of height, so one plant has room to stretch.
Size: 24 x 24 x 72 in | 2000D mylar canvas | Fits: 1 plant

CLOUDLAB 422 Grow Tent 2x2x4
A compact 24 x 24 x 48 in tent for one plant in a closet or on a shelf.
Size: 24 x 24 x 48 in | 2000D mylar canvas | Fits: 1 plant
Step 2: The Light
The light comes with the 2x2 kits above, so there is no separate 2x2 light. That is on purpose: the kit light is matched to the tent.
Step 3: Fresh Air
A 4-inch fan pulls air through a 4-inch filter and out through 4-inch ducting. Everything here is the same 4-inch size, so it all connects.

CLOUDLINE PRO S4 Inline Fan 4-Inch
A quiet 4-inch inline fan with a speed controller for venting small tents.
Size: 4 in | Speed controller included

Duct Carbon Filter 4-Inch
A 4-inch carbon filter with Australian charcoal that keeps grow smells inside your tent.
Size: 4 in | Australian charcoal
Fits the 4-inch fan.

Flexible Four-Layer Ducting 4-Inch, 8 Ft
8 feet of flexible 4-inch ducting to connect your fan and filter.
Diameter: 4 in | Length: 8 ft
8 ft is enough to run from the filter to the fan and out of most tents. Pick 25 ft only if your vent is across the room.

Flexible Four-Layer Ducting 4-Inch, 25 Ft
25 feet of 4-inch ducting for longer runs out of the room.
Diameter: 4 in | Length: 25 ft

Stainless Steel Duct Clamps 4-Inch, 2-Pack
Two stainless clamps that lock 4-inch ducting onto fans and filters.
Size: 4 in | Qty: 2
Seals each 4-inch connection. One 2-pack covers both ends of the fan.

Window Duct Kit for Inline Fans
An adjustable window vent port that sends your tent air outside.
Adjustable window port
Optional: vents the air out a window.
Step 4: Airflow
A gentle breeze inside the tent for strong stems.

CLOUDRAY S4 Compact Clip Fan 4-Inch
A small 4-inch clip fan that's great for 2x2 tents and clone areas.
Size: 4 in | EC motor | 10 speeds | 10 oscillation levels
Step 5: Humidity
A humidifier for young plants. In a 2x2 the inline fan pulling damp air out is usually enough, so we do not suggest a dehumidifier here.

CLOUDFORGE T3 Plant Humidifier 4.5L
A 4.5 L humidifier with smart controls that aims mist right where you need it.
Tank: 4.5 L | Smart controls | Targeted vaporizing
For clones and young plants.
Step 6: Controller
One controller runs the fan and the humidifier together.

CONTROLLER 69 PRO
Runs up to four devices on their own programs, including VPD, temperature, humidity, schedules and cycles.
Devices: 4 | Bluetooth + WiFi | VPD, temp, humidity, schedules
Plugs into the 4-inch fan and the humidifier.

CONTROLLER 69 PRO+
Everything in the 69 PRO, expanded to eight devices.
Devices: 8 | Bluetooth + WiFi | VPD, temp, humidity, schedules

CONTROLLER AI+ Environmental Controller
A smart controller that learns your setup and adjusts devices for you, with dual-zone VPD, temperature and humidity.
Dual-zone VPD | Bluetooth + WiFi | AI-assisted adjustments
Add-ons
Pots and watering
A 2x2 tent holds 1 plant.

Self-Watering Fabric Pot Base, 4-Pack
Bases that sit under fabric pots and wick water up from below.
Qty: 4
You need 1 pot: get 1 pack (4 pots, 3 spare).
Clone gear
Root your next round while this one grows. See all Clone & Propagation โ

Humidity Dome Germination Kit with Heat Mat and LED Bars, 5x8 Cell
Dome, 40-cell tray, seedling heat mat and LED bars in one box.
Tray: 5 x 8 (40 cells) | Includes heat mat and LED bars

Humidity Dome Propagation Kit with Height Extension, 5x8 Cell
A simple dome and 40-cell tray with an extension that gives taller cuttings extra headroom.
Tray: 5 x 8 (40 cells) | Includes height extension

Clone Collars 2-Inch, 100-Pack
Soft 2-inch foam discs that hold cuttings upright in cloners and net pots.
Size: 2 in | 8-spoke design | Qty: 100
Your complete 2x2 setup
One and Done kit: from $499
You save $68.92 with the One and Done kit...and the kit includes the light.
Tent, light, airflow and controls in one box.
Build it yourself (no light): $567.92
See the build-it-yourself picks
- CLOUDLAB 722 Grow Tent 2x2x6$149.00
- CLOUDLINE PRO S4 Inline Fan 4-Inch$89.99
- Duct Carbon Filter 4-Inch$49.99
- Flexible Four-Layer Ducting 4-Inch, 8 Ft$12.99
- Stainless Steel Duct Clamps 4-Inch, 2-Pack$5.99
- CLOUDRAY S4 Compact Clip Fan 4-Inch$49.99
- CLOUDFORGE T3 Plant Humidifier 4.5L$69.99
- CONTROLLER 69 PRO$79.99
- Self-Watering Fabric Pot Base, 4-Pack$59.99
- We ship clones Monday through Wednesday via UPS Next Day Air or UPS 2nd Day Air.
- Every AC Infinity product ships from AC Infinity and comes with an AC Infinity manufacturer warranty.
- Questions? We grow at home too. Just ask: support@clonetohome.com