Age verification
Are you over 21 years of age?
← Home Growing Equipment
3x3 Grow Setup
Room for three plants. Here's everything that fits a 3x3 tent, matched so it all works together perfectly.
One and Done: Complete Grow Kits
A one-and-done purchase: tent, light, airflow and controls in a single box.
Advance Grow Tent Kit 3x3, 3-Plant
A roomier kit for up to three plants, pairing a 3 x 3 ft tent with a matched full-spectrum LED, ventilation, circulation and WiFi control.
Coverage: 3 x 3 ft | Plants: up to 3 | Smart control: WiFi app
$699.00
Build It Yourself
Pick each piece, step by step.
Step 1: The Tent
Recommended
CLOUDLAB 733 Grow Tent 3x3
A 36 x 36 x 72 in tent that fits three plants.
Size: 36 x 36 x 72 in | 2000D mylar canvas | Fits: 3 plants
$179.00
Step 2: The Light
Sized to cover a 3x3 tent.
Recommended
IONFRAME EVO4 LED Grow Light, 3x3
A bar-style full-spectrum LED made for 3 x 3 ft tents, using Samsung LM301H EVO diodes.
Power: 300W | Coverage: 3 x 3 ft | Diodes: Samsung LM301H EVO
Pairs with the CLOUDLAB 733 tent.
$359.00
Step 3: Fresh Air
A 6-inch fan pulls air through a 6-inch filter and out through 6-inch ducting. Everything here is the same 6-inch size, so it all connects.
Recommended
CLOUDLINE PRO S6 Inline Fan 6-Inch
A quiet 6-inch inline fan with a speed controller, a popular choice for 3x3 and 4x4 tents.
Size: 6 in | Speed controller included
$99.00
Pairs with
Duct Carbon Filter 6-Inch
A 6-inch carbon filter for 3x3 and 4x4 tents that keeps odors in check.
Size: 6 in | Australian charcoal
Fits the 6-inch fan.
$69.99
Pairs with
Flexible Four-Layer Ducting 6-Inch, 8 Ft
8 feet of flexible 6-inch ducting for linking a fan and filter.
Diameter: 6 in | Length: 8 ft
8 ft is enough to run from the filter to the fan and out of most tents. Pick 25 ft only if your vent is across the room.
$16.99
Flexible Four-Layer Ducting 6-Inch, 25 Ft
25 feet of 6-inch ducting for longer vent runs.
Diameter: 6 in | Length: 25 ft
$25.99
Pairs with
Stainless Steel Duct Clamps 6-Inch, 2-Pack
Two stainless clamps for 6-inch ducting connections.
Size: 6 in | Qty: 2
Seals each 6-inch connection. One 2-pack covers both ends of the fan.
$7.99
Window Duct Kit for Inline Fans
An adjustable window vent port that sends your tent air outside.
Adjustable window port
Optional: vents the air out a window.
$39.99
Step 4: Airflow
A gentle breeze inside the tent for strong stems.
Recommended
CLOUDRAY S6 Gen 2 Clip Fan 6-Inch
A quiet 6-inch clip fan with an EC motor, 10 speeds and auto oscillation.
Size: 6 in | EC motor | 10 speeds | 10 oscillation levels
$49.99
Step 5: Humidity
A humidifier for young plants and a dehumidifier for flowering, both sized for this tent.
Recommended
CLOUDFORGE T3 Plant Humidifier 4.5L
A 4.5 L humidifier with smart controls that aims mist right where you need it.
Tank: 4.5 L | Smart controls | Targeted vaporizing
For clones and young plants.
$69.99
HYDRONE 5 Plant Dehumidifier
A compact dehumidifier with 10 levels of control that pulls extra moisture out of your tent.
10-level controls
For flowering, when plants give off more moisture.
$139.00
Step 6: Controller
One controller runs the fan and the humidifier together.
Recommended
CONTROLLER 69 PRO
Runs up to four devices on their own programs, including VPD, temperature, humidity, schedules and cycles.
Devices: 4 | Bluetooth + WiFi | VPD, temp, humidity, schedules
Plugs into the 6-inch fan and the humidifier.
$79.99
CONTROLLER 69 PRO+
Everything in the 69 PRO, expanded to eight devices.
Devices: 8 | Bluetooth + WiFi | VPD, temp, humidity, schedules
$99.00
CONTROLLER AI+ Environmental Controller
A smart controller that learns your setup and adjusts devices for you, with dual-zone VPD, temperature and humidity.
Dual-zone VPD | Bluetooth + WiFi | AI-assisted adjustments
$139.00
Add-ons
Pots and watering
A 3x3 tent holds 3 plants.
Recommended
Self-Watering Fabric Pot Base, 4-Pack
Bases that sit under fabric pots and wick water up from below.
Qty: 4
You need 3 pots: get 1 pack (4 pots, 1 spare).
$59.99
Clone gear
Root your next round while this one grows. See all Clone & Propagation →
Humidity Dome Germination Kit with Heat Mat and LED Bars, 5x8 Cell
Dome, 40-cell tray, seedling heat mat and LED bars in one box.
Tray: 5 x 8 (40 cells) | Includes heat mat and LED bars
$89.99
Humidity Dome Propagation Kit with Height Extension, 5x8 Cell
A simple dome and 40-cell tray with an extension that gives taller cuttings extra headroom.
Tray: 5 x 8 (40 cells) | Includes height extension
$38.99
Clone Collars 2-Inch, 100-Pack
Soft 2-inch foam discs that hold cuttings upright in cloners and net pots.
Size: 2 in | 8-spoke design | Qty: 100
$19.99
Your complete 3x3 setup
One and Done kit: $699
You save $292.93 with the One and Done kit.
Tent, light, airflow and controls in one box.
Build it yourself: $991.93
See the build-it-yourself picks
- CLOUDLAB 733 Grow Tent 3x3$179.00
- IONFRAME EVO4 LED Grow Light, 3x3$359.00
- CLOUDLINE PRO S6 Inline Fan 6-Inch$99.00
- Duct Carbon Filter 6-Inch$69.99
- Flexible Four-Layer Ducting 6-Inch, 8 Ft$16.99
- Stainless Steel Duct Clamps 6-Inch, 2-Pack$7.99
- CLOUDRAY S6 Gen 2 Clip Fan 6-Inch$49.99
- CLOUDFORGE T3 Plant Humidifier 4.5L$69.99
- CONTROLLER 69 PRO$79.99
- Self-Watering Fabric Pot Base, 4-Pack$59.99
- We ship clones Monday through Wednesday via UPS Next Day Air or UPS 2nd Day Air.
- Every AC Infinity product ships from AC Infinity and comes with an AC Infinity manufacturer warranty.
- Questions? We grow at home too. Just ask: support@clonetohome.com
One and Done 3x3 kit · $699