Age verification
Are you over 21 years of age?
← Home Growing Equipment
5x5 Grow Setup
Room for six plants. Here's everything that fits a 5x5 tent, matched so it all works together perfectly.
One and Done: Complete Grow Kits
A one-and-done purchase: tent, light, airflow and controls in a single box.
Advance Grow Tent Kit PRO 5x5, 6-Plant
Includes EC inline fan 6”, oscillating clip fan 6”, and 5x5 full-spectrum bar grow light with Samsung LM301H EVO LEDs. AI-driven controller predicts climate shifts using real-time and historical data, auto-adjusting connected devices for optimal grow conditions.
Coverage: 5 x 5 ft | Plants: 6 | Smart control: WiFi app
$1,599.00
Build It Yourself
Pick each piece, step by step.
Step 1: The Tent
Recommended
CLOUDLAB 866 Grow Tent 5x5
A roomy 60 x 60 x 80 in tent for up to six plants.
Size: 60 x 60 x 80 in | 2000D mylar canvas | Fits: 6 plants
$249.00
Step 2: The Light
Sized to cover a 5x5 tent.
Recommended
IONFRAME EVO8 LED Grow Light, 5x5
The biggest frame in the line, built to cover a 5 x 5 ft tent.
Power: 730W | Coverage: 5 x 5 ft | Diodes: Samsung LM301H EVO
Pairs with the CLOUDLAB 866 tent.
$799.00
Step 3: Fresh Air
A 8-inch fan pulls air through a 8-inch filter and out through 8-inch ducting. Everything here is the same 8-inch size, so it all connects.
Recommended
CLOUDLINE PRO S8 Inline Fan 8-Inch
A powerful 8-inch inline fan with a speed controller for larger tents like the 5x5.
Size: 8 in | Speed controller included
$159.00
Pairs with
Duct Carbon Filter 8-Inch
An 8-inch carbon filter for big tents and strong airflow.
Size: 8 in | Australian charcoal
Fits the 8-inch fan.
$119.00
Pairs with
Flexible Four-Layer Ducting 8-Inch, 8 Ft
8 feet of 8-inch ducting for larger fan setups.
Diameter: 8 in | Length: 8 ft
8 ft is enough to run from the filter to the fan and out of most tents. Pick 25 ft only if your vent is across the room.
$19.99
Flexible Four-Layer Ducting 8-Inch, 25 Ft
25 feet of 8-inch ducting for big tents and long runs.
Diameter: 8 in | Length: 25 ft
$39.99
Pairs with
Stainless Steel Duct Clamps 8-Inch, 2-Pack
Two stainless clamps for 8-inch ducting.
Size: 8 in | Qty: 2
Seals each 8-inch connection. One 2-pack covers both ends of the fan.
$7.99
Window Duct Kit for Inline Fans
An adjustable window vent port that sends your tent air outside.
Adjustable window port
Optional: vents the air out a window.
$39.99
Step 4: Airflow
A gentle breeze inside the tent for strong stems.
Recommended
CLOUDRAY S6 Gen 2 Clip Fan 6-Inch, 2-Pack
Two quiet 6-inch clip fans with EC motors, 10 speeds, 10 oscillation levels and natural wind modes.
Size: 6 in | Qty: 2 | EC motor | 10 speeds
$99.00
Step 5: Humidity
A humidifier for young plants and a dehumidifier for flowering, both sized for this tent.
Recommended
CLOUDFORGE T7 Plant Humidifier 15L
A large 15 L humidifier for bigger tents and longer stretches between refills.
Tank: 15 L | Smart controls | Targeted vaporizing
For clones and young plants.
$169.00
HYDRONE 7 Plant Dehumidifier with VPD Control
A larger dehumidifier with VPD-based humidity control and 10 drying levels.
VPD humidity control | 10 drying levels
For flowering, when plants give off more moisture.
$259.00
Step 6: Controller
One controller runs the fan and the humidifier together.
Recommended
CONTROLLER 69 PRO
Runs up to four devices on their own programs, including VPD, temperature, humidity, schedules and cycles.
Devices: 4 | Bluetooth + WiFi | VPD, temp, humidity, schedules
Plugs into the 8-inch fan and the humidifier.
$79.99
CONTROLLER 69 PRO+
Everything in the 69 PRO, expanded to eight devices.
Devices: 8 | Bluetooth + WiFi | VPD, temp, humidity, schedules
$99.00
CONTROLLER AI+ Environmental Controller
A smart controller that learns your setup and adjusts devices for you, with dual-zone VPD, temperature and humidity.
Dual-zone VPD | Bluetooth + WiFi | AI-assisted adjustments
$139.00
Add-ons
Pots and watering
A 5x5 tent holds 6 plants.
Recommended
Self-Watering Fabric Pot Base XL, 4-Pack
An XL size of the self-watering base for bigger fabric pots.
Size: XL | Qty: 4
You need 6 pots: get 2 packs (8 pots, 2 spare).
$99.00
Clone gear
Root your next round while this one grows. See all Clone & Propagation →
Humidity Dome Germination Kit with Heat Mat and LED Bars, 5x8 Cell
Dome, 40-cell tray, seedling heat mat and LED bars in one box.
Tray: 5 x 8 (40 cells) | Includes heat mat and LED bars
$89.99
Humidity Dome Propagation Kit with Height Extension, 5x8 Cell
A simple dome and 40-cell tray with an extension that gives taller cuttings extra headroom.
Tray: 5 x 8 (40 cells) | Includes height extension
$38.99
Clone Collars 2-Inch, 100-Pack
Soft 2-inch foam discs that hold cuttings upright in cloners and net pots.
Size: 2 in | 8-spoke design | Qty: 100
$19.99
Your complete 5x5 setup
One and Done kit: $1,599
You save $300.97 with the One and Done kit.
Tent, light, airflow and controls in one box.
Build it yourself: $1,899.97
See the build-it-yourself picks
- CLOUDLAB 866 Grow Tent 5x5$249.00
- IONFRAME EVO8 LED Grow Light, 5x5$799.00
- CLOUDLINE PRO S8 Inline Fan 8-Inch$159.00
- Duct Carbon Filter 8-Inch$119.00
- Flexible Four-Layer Ducting 8-Inch, 8 Ft$19.99
- Stainless Steel Duct Clamps 8-Inch, 2-Pack$7.99
- CLOUDRAY S6 Gen 2 Clip Fan 6-Inch, 2-Pack$99.00
- CLOUDFORGE T7 Plant Humidifier 15L$169.00
- CONTROLLER 69 PRO$79.99
- Self-Watering Fabric Pot Base XL, 4-Pack ×2$198.00
- We ship clones Monday through Wednesday via UPS Next Day Air or UPS 2nd Day Air.
- Every AC Infinity product ships from AC Infinity and comes with an AC Infinity manufacturer warranty.
- Questions? We grow at home too. Just ask: support@clonetohome.com
One and Done 5x5 kit · $1,599