Proven clones for the home grower community

By Chris Gaffney

4x4 Grow Tent Kit: What's Inside and How to Set It Up

A complete 4x4 grow tent kit bundles a 4 x 4 ft tent with a matched full-spectrum LED, an inline fan, a carbon filter, ducting, a clip fan and a controller. On our 4x4 page, the setup is planned around four plants. A practical setup order is the tent first, then the light, then airflow and controls.

ㅤ

📦 What's Inside the AC Infinity Advance Grow Tent Kit 4x4

According to AC Infinity, the Advance Grow Tent Kit 4x4 (AI Grow Tent System 4x4) includes:

  • A 48 x 48 x 80 in grow tent with reflective Mylar and a viewing window
  • A 4x4 full-spectrum LED grow light with Samsung LM301H LEDs
  • A 6-inch EC inline fan
  • A 6-inch oscillating clip fan
  • A carbon filter and ducting
  • An AI controller with WiFi app access

ㅤ

🧩 Kit or Build a 4x4 Piece by Piece

If you would rather choose each part, our 4x4 page lays out a matched build:

  • Tent: CLOUDLAB 844, 48 x 48 x 80 in
  • Light: IONFRAME EVO6, 500W, rated by AC Infinity for 4x4 coverage, with Samsung LM301H EVO diodes
  • Exhaust: a CLOUDLINE PRO S6 6-inch inline fan with a speed controller, a 6-inch duct carbon filter and 6-inch four-layer ducting. The 844's duct ports are 4-inch and 8-inch, so the 6-inch duct can exit through an 8-inch port with an 8-to-6-inch duct reducer
  • Controls: CONTROLLER 69 PRO, a 4-port climate controller with a temperature, humidity and VPD sensor

The kit trades some choice for simplicity; the build trades some simplicity for choice. Our grow kits page compares every kit size if you are still deciding.

ㅤ

📏 Before You Unbox

Floor space and height

A 4x4 tent needs a 48 x 48 in footprint plus room to open the door and reach around it, and 80 in of height for the tent itself. Check the ceiling clearance where the tent will stand.

Power and venting

Plan where the controller, light and fans will plug in, and where the exhaust air will go, such as a window or another room.

ㅤ

🔧 Step-by-Step 4x4 Setup

  1. Build the frame and canvas following the manual, and make sure the zippers close fully.
  2. Hang the light from the top bars so it can be raised and lowered.
  3. Mount the inline fan and carbon filter, then connect them with ducting and run the exhaust out of a port.
  4. Clip the oscillating fan to a pole so air moves across the canopy area.
  5. Connect the controller and sensor, then set up the app.
  6. Run the tent empty for a day or two and watch temperature and humidity before adding plants.

ㅤ

🌿 Planning a 4x4 Canopy From Clones

Our 4x4 page is planned around four plants, which matches AC Infinity's rating for this kit. Some growers run other layouts depending on pot size and training; our plant count by tent size guide covers those options, and our low-stress training guide explains how to fill a canopy evenly.

ㅤ

💡 Light Height and Dimming

Young clones tend to need gentler light than flowering plants, so many growers start with the light dimmed or raised and increase intensity over time. Follow AC Infinity's manual for hanging heights, and see our PPFD guide for how light intensity changes with distance.

ㅤ

🌬️ Airflow and Climate Control

The inline fan pulls air through the carbon filter and out of the tent, while the clip fan keeps air moving across the plants. The controller can adjust fan speed based on temperature and humidity. For target ranges, see our temperature and humidity guide and our VPD explainer.

ㅤ

❓ Frequently Asked Questions

What comes in a 4x4 grow tent kit?

AC Infinity's Advance Grow Tent Kit 4x4 includes a 48 x 48 x 80 in tent, a 4x4 full-spectrum LED, a 6-inch EC inline fan, a 6-inch oscillating clip fan, a carbon filter, ducting and an AI controller.

What size inline fan does a 4x4 grow tent need?

Our 4x4 setup uses a 6-inch inline fan with a matching 6-inch carbon filter and ducting. On the CLOUDLAB 844, which has 4-inch and 8-inch duct ports, that 6-inch run can connect to an 8-inch port with an 8-to-6-inch duct reducer. The 4x4 kit also uses a 6-inch EC inline fan.

What wattage LED fits a 4x4 tent?

The IONFRAME EVO6 in our 4x4 build is a 500W LED that AC Infinity rates for 4x4 coverage. Other lights may differ, so check each light's rated coverage.

How much room do I need around a 4x4 tent?

Plan for the 48 x 48 in footprint plus enough space to open the door and reach the sides and back.

Is a 4x4 grow tent too big for a first grow?

Not necessarily. A 4x4 needs more space, a stronger light and more airflow than smaller tents. If space is tight, a 2x4 or 3x3 may be easier to manage.

ㅤ

📚 Continue Learning

ㅤ

🌿 Ready to Fill Your Tent?

A 4x4 is ready once the gear is running steadily. Browse our rooted cannabis clones, then see our 4x4 grow setup to match the gear to your space.